Cat® 980

Ana Sayfa / Cat® 980
Awesome Image

Cat® 980

Cat® 980 Lastikli Tekerlekli Yükleyici, üstün performansı kullanımı kolay teknolojilerle standart olarak sunarak operatör verimliliğini artırır ve üretkenliği yükseltir. Geliştirilmiş performans, güvenilirlik, dayanıklılık ve çok yönlülük, işlerinizi karşılamak için daha iyi üretilmiş bir makine ile sonuçlanır.

Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 292 kW 
Operating Weight 30344 kg 
Bucket Range 4.0-14.5 m³ 5.25-19 yd³

 

Engine

Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 292 kW
Engine Model Cat C13
Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.
Gross Torque @ 1,200 rpm – SAE J1995:2014 2206 N·m
Displacement 12.5 L
Engine Torque @ 1,200 rpm – ISO 14396:2002 2185 N·m
Gross Power @ 1,700 rpm – SAE J1995:2014 317 kW
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 2086 N·m
Engine Power @ 1,700 rpm – ISO 14396:2002 313 kW

Weights

Operating Weight 30344 kg
Note Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m3 (7.1 yd3) general purpose bucket with BOCE.

Bucket Capacities

Bucket Range 4.0-14.5 m³ 5.25-19 yd³

Transmission

Forward - 1 6.9 km/h
Forward - 2 13.3 km/h
Forward - 3 23.5 km/h
Forward - 4 39.5 km/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
Reverse - 1 7.8 km/h
Reverse - 2 15.2 km/h
Reverse - 3 26.9 km/h
Reverse - 4 39.5 km/h

Sound

Note (1) ** For machines in European Union countries and in countries that adopt the ?EU Directives.?
Note (2) ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 109
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 112 dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 78
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A)

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

Operating Specifications

Breakout Force 227 kN
Note (1) For a machine configuration as defined under ?Weight.?
Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection 46208 lb
Static Tipping Load - Full 40° Turn - With Tire Deflection 19706 kg

Service Refill Capacities

Cooling System 52 l
Crankcase 37 l
DEF Tank 21 l
Differential - Final Drives - Front 84 l
Differential - Final Drives - Rear 84 l
Fuel Tank 426 l
Hydraulic Tank 153 l
Transmission 77 l

Hydraulic System

Implement System - Maximum Operating Pressure 34300 kPa
Implement System - Maximum Pump Output at 2,250 rpm 449 l/min

Dimensions

Note All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

Dimensions - High Lift

Centerline of Rear Axle to Edge of Counterweight 2661 mm
Centerline of Rear Axle to Hitch 1900 mm
Ground Clearance 456 mm
Height - Top of Exhaust Pipe 3764 mm
Height - Top of Hood 3064 mm
Height - Top of ROPS 3829 mm
Hinge Pin Height at Carry 682 mm
Hinge Pin Height at Maximum Lift 4775 mm
Lift Arm Clearance at Maximum Lift 4125 mm
Overall Length - Without Bucket 8355 mm
Tread Width 2440 mm
Wheel Base 3800 mm
Rack Back - Carry Height 50 degrees
Rack Back - Maximum Lift 61 degrees
Rack Back at Ground 40 degrees
Width over Tires (Loaded) 3260 mm

Dimensions - Standard Lift

Centerline of Rear Axle to Hitch 1900 mm
Ground Clearance 1.5 ft
Height - Top of Exhaust Pipe 12.5 ft
Height - Top of Hood 10.1 ft
Height - Top of ROPS 12.7 ft
Hinge Pin Height at Carry 682 mm
Hinge Pin Height at Maximum Lift 14.11 ft
Lift Arm Clearance at Maximum Lift 12.8 ft
Overall Length - Without Bucket 26.1 ft
Tread Width 2440 mm
Wheel Base 12.6 ft
Centerline of Rear Axle to Edge of Counterweight 2661 mm
Rack Back - Carry Height 50 degrees
Rack Back - Maximum Lift 61 degrees
Rack Back at Ground 40 degrees
Width over Tires (Loaded) 3260 mm